MSP Today Industry News

TMCNet:  ASTRI demonstrates its latest 4G/5G and Smart City technologies at PT EXPO China 2017 in Beijing

[September 27, 2017]

ASTRI demonstrates its latest 4G/5G and Smart City technologies at PT EXPO China 2017 in Beijing

HONG KONG, Sept. 27, 2017 /PRNewswire/ -- Hong Kong Applied Science and Technology Research Institute (ASTRI) is showcasing its latest 4G/5G and smart city technologies at the PT EXPO China 2017 in Beijing. ASTRI's advanced solutions drive technological breakthroughs in 4.5G and 5G as well as a wide range of smart city applications. PT EXPO is a dynamic international platform for the information and communications technology (ICT) ecosystem. It provides ideal services and networking opportunities in the aspects of policies, research and development, applications, market trends, and investment.

ASTRI’s technology expert (right) introduces the latest 4G/5G and smart city technologies to the visitor at the PT EXPO China 2017.

ASTRI is showcasing the following technologies and solutions in this year's PT EXPO:

1. 3-in-1 SDN/NFV Core Network Turnkey Solution

ASTRI is a pioneer in Network Function Virtualisation (NFV) especially in mobile core network. Leveraging its extensive experience in NFV architecture and performance tuning, ASTRI is introducing a 3-in-1 turnkey NFV solution to significantly reduce the time and complexity of integrating, deploying and optimising virtualised network solutions. The 3-in-1 solution consists of:

a) FastCloud virtual platform: a flexible NFV platform which is easily deployed with high throughput and Software Defined Networking (SDN) capabilities;

b) FastCloud orchestrator; and

c) Virtualised core network and IPSec security gateway: providing 10Gbps IPSec throughput with minimal CPU cores.

2. Centralised Radio Access Network (C-RAN) Reference Design for 4G and 5G Radio Access

C-RAN is a centralised, cloud-based cellular network architecture which allows mobile network operators (MNOs) to improve service quality, reduce capital and operating expenditures. It also helps to minimise energy consumption. ASTRI's Baseband Unit (BBU) pool design has a cost effective functional split to support wide coverage. The L3 and Packet Data Convergence Protocol (PDCP) are centralised with distributed Radio Remote Units (RRUs) for MAC and PHY processing. The architecture of the BBU pool design is very flexible. When extended for centralised MAC and PHY processing, it supports coordinated joint transmission and joint reception (JT/JR), with enhanced spatial efficiency. The design can be scaled to support 3GPP release 15 NR specifications including digital beamforming, beam management, flexible frame structure and subcarrier spacing for high data rate and better reliability, and in low latency applications.

3. LTE Broadband Trunking Communication (B-TrunC) System for Mission Critical Communications

LTE B-TrunC standard caters to the needs related to new and emerging services such as video, image and high-speed data transmission. The standard has been accepted by the International Telecommunication Union (ITU) as an international Public Protection and Disaster Relief (PPDR) broadband trunking air interface standard. ASTRI's end-to-end B-TrunC system supports real-time bi-directional data streaming and broadband trunking services on multiple trunking mobile terminals. Its key features include high voice/video group call capacity (>7.5 groups of voice calls per cell/MHz), low end-to-end latency <200ms), dynamic regrouping, emergency call, and broadcasting message services. It also delivers high bandwidth and high reliability in private network applications.

4. Narrowband IoT (NB-IoT) Standardisation and Development

As a pioneer in this area, ASTRI offers NB-IoT IP and reference design for user equipments including RF transceiver, integrated power amplifier, integrated power management unit, digital baseband and System-on-Chip (SoC). As part of the global 3GPP Release 13 and 14 standards, NB-IoT is optimised for Low Power Wide Area (LPWA) applications, focusing on enhanced coverage, low cost, long battery life and massive deployment. It also facilitates the introduction of numerous new IoT devices and services.

5. Bluetooth Low Energy (BLE) solutions

BLE versions 4.2 and 5 are key enablers of short range wireless IoT applications and wearable electronics. ASTRI's BLE live demonstration collects and processes sensor data from its BLE 4.2 System-on-Chip (SoC), and sends feedback data to Android application users. BLE 5 doubles the speed, quadruples the range, and increases data broadcasting capacity by 800%. While ASTRI already holds the IP for BLE 5 RF transceiver, the baseband portion is currently under development.

6. Automatic Meter Reading System (AMRS)

ASTRI's award-winning Automatic Meter Reading System employs LoRa and GPRS technologies to collect and process data from smart meters of water, electricity, gas, heat or other utilities. Using LoRa, it simultaneously measures more than 100 meter readings, and covers a distance of over 1500 meters, penetrating 15 to 18 building floors with a battery life of five years. Using GPRS, the Smart Data Collector feeds into the system server or mobile phone for data storage, monitoring, and analysis.

7. Wireless Charging Platform

ASTRI has been a forerunner to employ the latest third-generation semiconductor GaN FET devices in mid-to-long-range wireless charging systems of consumer electronics. Based on AirFuel standards, ASTRI's wireless charging system adopts magnetic resonance technology. It has a built-in high frequency inverter circuit driver module compatible with dynamic impedance network, and a control algorithm measurement module. It works well with mid-to-long-range wireless charging (10~20cm). Among many benefits, it delivers higher power transmission efficiency (>80%), simultaneous multi-electronic devices charging (~8 devices), flexible 'anywhere setting', quick charging and low-cost applications. ASTRI has a comprehensive patent portfolio on wireless charging technologies, currently working with a few customers to further develop these. Capturing the industry's attention, ASTRI has already delivered a wide range of smart home applications that received critical acclaim.

8. Integrated Power Module Products

ASTRI has robust R&D experience in developing mature high-end power modules. ASTRI's patents on 3D wirebond-less interconnect technology/module meet the new generation IGBT module requirements including ultra-high-power density and thermal dissipation. This technology/module uses 3D interconnect structure to substitute the traditional wirebond structure. It reduces around 96% of parasitic resistance, 72% of parasitic inductance and 43% turn-off loss. With its compatible SMT assembly technique, it can be rapidly adapted for mass production. ASTRI has developed 1/8 brick module for communication applications which has high conversion efficiency (~95%) and high power (240W). It has a high dissipation ratio - key device temperature remains 20% lower than the common industry products. In addition, the 1/4 brick module facilitates multiple design options (e.g. plastic shell, metal shell and full-mould), low-ripple (50mV), and high conversion efficiency (~95%).

9. Visually Enhanced Ultra-HD Platform (HD-4K Conversion) for 4K TV

ASTRI's Visually Enhanced Ultra-HD Platform (VEUHD HD-4K Conversion) delivers true Ultra-HD visual experience from HD content on a 4KTV. Contrary to existing conversion options available in the market, ASTRI's VEUHD HD-4K Conversion technology holistically analyses important display parameters of panels, content image characteristics and user preferences. It delivers superior sharpness and visual quality as well as an immersive viewing experience. It uses innovative techniques such as Human Visual System (HVS) preference model and optimisation, adaptive edge and detail enhancement, and dynamic colour and contrast enhancement. These technologies are available for FPGA and ASIC real-time solutions, both as software applications and as hardware core.

Referring to the PT EXPO China event as "one of the largest and most influential ICT events in Asia", Dr Meikei Ieong, Chief Technology Officer of ASTRI added that "ASTRI seeks to make significant contributions to technological advancement in the telecommunication and industrial sectors in this region. Our demonstrations in the PT EXPO presents superior and novel technological solutions we have developed and subsequently made available to the industry."

PT EXPO is hosted by the Ministry of Industry and Information Technology of the People's Republic of China and organised by China National Postal and Telecommunications Appliances Corporation. The demonstrations take place at ASTRI's booth (Booth number 1020) at the PT EXPO China 2017 in Beijing, being held at the China National Convention Centre from 27 to 30 September 2017.

About ASTRI

Hong Kong Applied Science and Technology Research Institute Company Limited (ASTRI) was founded by the Government of the Hong Kong Special Administrative Region in 2000 with the mission of enhancing Hong Kong's competitiveness in technology-based industries through applied research. ASTRI's core R&D competences in various areas are organised under seven Technology Divisions, namely Communications Technologies, Electronics Components, Mixed Signal Systems IC, Advanced Digital Systems, Opto-electronics, Security and Data Sciences, and Intelligent Software and Systems. Five areas of applications including financial technologies, intelligent manufacturing, next generation network, health technologies, and smart city are identified for major pursuit. For further information about ASTRI, please visit www.astri.org

Media enquiries:
For enquiries, please contact Ms Cherry Au (Tel: +852-3406-2993, email: cherryau@astri.org)

Photo - https://photos.prnasia.com/prnh/20170927/1951625-1

SOURCE Hong Kong Applied Science and Technology Research Institute (ASTRI)


[ Back To Contact Center on Demand Homepage's Homepage ]